Request a quote

ACP Cladding Area Calculator

This ACP cladding area calculator gives the square metres of wall to clad: wall width × height, minus windows and doors. It gives no price, because ACP cladding is quoted per job after a free site inspection.

Enter the wall width and height to see the area to clad.

How to measure a wall for the calculator

The calculator is a cladding quantity calculator for one wall at a time. It needs three figures.

  1. Wall width, in metres. Measure along the face of the wall you want clad.
  2. Wall height, in metres. Measure from where the cladding starts to where it stops.
  3. Windows and doors, in m². For each opening on that wall, multiply its width by its height, then add the openings together. Leave this box blank if the wall has none.

The calculator multiplies width by height and takes off the windows and doors. If the openings come to more than the wall, it asks you to check the figures. For a building with four clad walls, run it four times and add the results.

What the result includes, and what it does not

It includes the flat area of the wall you measured, in m², less the openings you entered.

It does not include:

  • A price. ACP cladding is quoted per job, and the calculator holds no rate per m².
  • The panel. Panel type (standard, fire-rated or PVDF-coated), thickness (3mm, 4mm or 6mm) and finish (matte, glossy, metallic or wood grain) are chosen with you for the quotation.
  • Other walls. Each wall is a separate calculation.
  • The site. Building height and installation complexity change the job, and they are checked at the site inspection.

What happens after you have the area

  1. Press Request a quotation for this area. The area goes into the enquiry form, and you add the building’s location.
  2. We reply within the hour, and book a free site inspection.
  3. You receive a detailed quotation, with a technical drawing if you want one. The panel named in the quotation is the panel we install.
  4. Before handover, every sealant joint is sprayed with water to confirm none gets behind the cladding. Six months of free maintenance and defects cover are written into the contract.

Questions buyers ask

Does the ACP cladding area calculator give a price?

No. It gives the area of one wall to clad, in m²: width × height, minus windows and doors. ACP cladding is quoted per job. The price moves with building height, panel grade, finish type and installation complexity, and with the size of the project, the cost of materials and the location. Send us the area and the site location. We inspect the site free of charge, then send a detailed quotation, with a technical drawing if you want one.

How do I use it for a building with several walls?

Enter one wall at a time: its width and height in metres, and the total area of its windows and doors in m². Note each result, then add them together for the whole building.

Tell us about your site

Send the service, the site location and its size. We reply within the hour, and book your free site inspection. A detailed quotation follows, with a technical drawing if you want one.

Or call +234 8028347545.

Send an enquiry

We reply within the hour.